Board type: CC2530 + RFX2401 (configure PA control pins!!!)
Device type: Router
 Transmit enable (TXEN): P11, Receive enable (RXEN): P10
Manufacturer name: xyzroe
Model ID: ZigDC
Update firmware's timestamp : 2024-07-05
Status LED: P17, Sending reports
Set default reporting interval (s): 60

Output pins:
P33: Output 2, GPIO (Role: Generic)
P05: Output 3, TI INA3221, External pull-up (Address (dec): 65, Channel: All)
P06: Output 4, I2C SCL/SPI CLK, External pull-up
P05: Output 5, TI INA3221, External pull-up (Address (dec): 64, Channel: All)
P05: Output 6, Temperature sensor (I2C), External pull-up (Address (dec): 112, Type: SHTC3)

Input pins:
P20: Input 1, GPIO, Pull-up, Long, Double, Tripple (Bind command: On/Off)
P36: Input 2, Internal temperature
P04: Input 7, GPIO, Pull-up (Bind command: On/Off)
P16: Input 8, GPIO, Pull-up (Bind command: On/Off)